Imetec ZEROCALC ECO K3 2300 User Manual

Page 14

Advertising
background image

EN

12

authorised technical service centre.

• The iron must be used on a stable surface. When the iron is placed

on the iron rest, make sure the support is stable. The iron must not

be used if it has been dropped, if it is visibly damaged or if it leaks

water.

• If the power cable is damaged it must be replaced by an authorised

technical service centre, so as to prevent all risks.

• The electrical safety of this appliance is only guaranteed when it

is connected correctly to an effective earthing system as required

by applicable electrical safety standards. This important safety

requirement must be verified and, if in doubt, request a thorough

check of the system by a qualified technician.

• The electrical safety of this appliance is only guaranteed when it

is connected correctly to an effective earthing system as required

by applicable electrical safety standards. This important safety

requirement must be verified and, if in doubt, request a thorough

check of the system by a qualified technician.

DO NOT immerse the iron, the power cord or the plug in any

kind of liquid.
DO NOT leave the hot iron in contact with easily flammable

fabric.

DO NOT leave the iron unattended when connected to the

power supply.
DO NOT dispense steam when the iron is resting on its mat.

ATTENTION! Hot surface.

DO NOT use chemical additives, scented substances or

descaling agents.

• This iron is not equipped with a pressure boiler and has been

designed to be used for brief periods of time in order to prevent

stress related to this chore. For this reason it is recommended not

to iron for more than an hour.

Advertising