Imetec LIVING AIR M1-100 - Manual (Page 10)

8
APPLIANCE A
Fan heater function
- Turn the power selector switch [Fig. A] as follows:
position : Warm air (1100W).
position : Hot air (2200W)
APPLIANCE B
Fan heater function
- Turn the power selector switch [Fig. E] as follows:
position : Warm air (1000W).
position : Hot air (2000W)
- Regulate the thermostat [Fig. C] depending on the temperature that you wish to maintain.
Cool air facility:
- Turn the thermostat [Fig. C] to the maximum temperature MAX.
- Turn the power selector switch [Fig. E] to position .
Antifreeze function
This function maintains the room temperature at +5°C. When the temperature drops below this level, the fan heater turns on automatically.
- Turn the thermostat [Fig. C] to the antifreeze setting
I
.
- Turn the power selector switch [Fig. E] as follows:
position for gradually restoring the temperature to +5°C.
position for rapidly restoring the temperature to +5°C.
Imetec-Ion77 Technology (only for models with ionizer)
If your appliance is equipped with an ionizer, the indicator light
m will be lit indicating that it is working.
The Imetec-Ion 77 fan heater is equipped with an ionizer, a revolutionary device which reproduces the natural phenomenon of ionization.
The ions generated by the fan heater act positively on the air, revitalising and conditioning it.
APPLIANCE C - C1
Fan heater function
- Turn the power selector switch [Fig. B] as follows:
position : Warm air (1100W).
position : Hot air (2200W)
- Regulate the thermostat [Fig. D] depending on the temperature that you wish to maintain.
Ventilator function:
- Turn the thermostat [Fig. D] to the maximum temperature MAX.
- Turn the power selector switch [Fig. B] to position .
Antifreeze function
This function maintains the room temperature at +5°C. When the temperature drops below this level, the fan heater turns on automatically.
- Turn the thermostat [Fig. D] to the antifreeze setting
I
.
- Turn the power selector switch [Fig. B] as follows:
position for gradually restoring the temperature to +5°C.
position for rapidly restoring the temperature to +5°C.
I N S T R U C T I O N S F O R U S E
• Timer - [Fig. F] (only for equipped models)
f1: notches for presetting the time periods.
f2: outer ring.
PLEASE NOTE:
- If the timer has been preset, the selected temperature will be maintained only within the preset time periods.
• Adjustable base - (only for equipped models)
Standard position [Fig. G].
Tilted position: the base can be adjusted to direct warm/cold air upwards. Whilst holding the base steady, slide the motor unit forward
[Fig. H].