Imetec BF2 200 - Manual (Page 9)

• Step on the scales with bare feet and position yourself on the electrodes (metal part) as
shown in the figure below.
ATTEnTIon!
As well as positioning yourself on the electrodes (metal part) , it is important
to make sure that there is no contact between the legs and between your feet. If
necessary, place a sheet of paper between your legs.
• Stand still on the device, the weight is permanently displayed on the LCD (1) when this is
stable.
• The measurement will start automatically with the "o" signal that moves from left to right of
the LCD display (1).
• After the measurement has been taken, the results will be displayed in sequence for three
times, after which the scales will turn off automatically.
GB
7