Ultimate Support LIVE-T - Manual (Page 2)

Legs Lock
in Place
BASE LOCK
Optional
Custom Top Standard
LIVE Top
STEP 2
While squeezing the trigger raise or
lower the clutch/upper shaft to your
desired height. Release the trigger and
the internal lock engages for a secure
and reliable hold. STEP 1
Tripod Base: Fold legs down and turn base
lock on bottom of stand to locked position.
Weighted Base: Shaft screws into
weighted base.
Weighted Base Design: Allows any Live
weighted base stand shaft to be used with
any Live weighted base.
2 3
LEG REPLACEMENT
The legs on the Live Series Mic Stands are built to be extra durable, withstanding the rigors of
everyday use. However, if a leg should get damaged, the stand is designed to be field repairable
and the legs can be replaced. Please visit www.ultimatesupport.com or call customer support
at 800-525-5628 for more details.
STEP 3 Universal Mic Attachment
To adjust US to metric, use tool provided or
1.5 Allen Wrench to unlock threads. Turn
US threads counter clockwise until it is
removed. US MIC-Lock will come off too.
STEP 4 Universal Mic Attachment
After choosing desired thread, place
microphone on universal mic attachment.
Then turn MIC-Lock counter clockwise to
lock mic in place.
set-up features
1 2
Metric
US
4
4
MIC-Lock
LOCKED
LOCKED
MIC-Lock
THE SHAFT OF ANY
WEIGHTED LIVE STAND
CAN BE USED WITH ANY
WEIGHTED LIVE BASE!
Metric
US Mic Lock
3
US Mic
Tool or 1.5
Allen
Wrench
Same Live Weighted Base Mic Shaft
OPTIONAL: Retro fit any of the NEW Custom Mic Tops onto any of the Live
Series stands with full functionality for your own unique style.
CUSTOMIZABLE