Braun 6610 FreeGlider - Manual (Page 15)

15
Changing the applicator
The applicator is subject to wear. You should exchange
it when in the course of time you feel that less Shaving
Conditioner is applied. Replacement applicators come
with Shaving Conditioner refill cartridges
(see «Accessories»).
a) Remove the foil frame.
b) Lift old applicator at the notch on one side, then the
other.
c) Remove old applicator and dispose.
d) Place new applicator on the foil frame, leaving a small
gap.
e) With both thumbs push applicator right and left until it
clicks into place.
f) Replace foil frame, ensuring both sides click audibly into
place.
Replacing the shaving parts
To maintain 100% shaving performance, replace your
foil and cutter block every 18 months or when worn.
Change both parts at the same time for a closer shave
with less skin irritation.
(Foil frame and cutter block: FreeGlider)
Accessories
Available at your dealer or Braun Service Centres:
• Foil frame and cutter block (FreeGlider)
• Cartridge with Shaving Conditioner (SCR)
c
max max min min
f e
max max
min min
max max min min
old
max max min min
new
max max min min
click!
max max
min min
1
2 3
b
a
max max
min min
click!
d
FreeGlider
5708300_Flex500_MN_S4-102 Seite 15 Dienstag, 15. August 2006 3:13 15