Andrew James AJ000350 Digital Food Dehydrator - Manual (Page 8)

8
How to operate your food dehydrator
1. Safely place the appliance on a flat and level surface. Load and insert the
trays, then insert the plug into the electrical outlet.
2. To adjust the temperature press the “TEMP” button and select the
temperature you require. To change the temperature in singular digits, press
the button without holding it. To increase the temperature rapidly hold the
button.
3. Set the desired amount of time by pressing and holding the “Timer” button.
The number displayed in the digital display represents the number of hours
the appliance will operate at before automatically turning off. When
pressing the button, the digital display will cycle from 1 hour through to 48
hours then restart at 1 again. Individual presses of the button will advance
the count by one hour. Holding the button will advance the time quicker.
4. Press the ON/OFF button to begin the programme cycle. The colon in the
timer display will begin to flash indicating it is running. The display shows the
remaining time of operation in the format HH MM. You will also hear the fan
operating.
5. The appliance will stop automatically when the time expires or you can stop
it any time using the ON/OFF button. Remove the plug from the outlet.
If you wish to add more time during the cycle or if you want to change the set
temperature, press the ON/OFF button once to stop the process, change the
desired setting as described above and then restart it by pressing the ON/OFF
switch again.