Andrew James AJ000360 Meat Grinder with Tomato Squeezer - Manual (Page 6)

6
Before first time use

Check that the voltage indicated on the rating label corresponds to the
mains voltage in your home.

Wash all parts (except body in warm water).

Before plugging in the appliance, ensure the “ON/0/R” switch is turned to
“0” position.
Assembling the meat grinder
1.
Holding the head, insert it in the inlet
(Fig 1) and rotate the head anti-
clockwise (Fig 2) until you hear a small
clicking sound this will signal that the
head is secured in the correct position.
Try to gently rock the head to ensure it
is secure and stable.
2. Place the feed screw into the head,
long end first and turn the feed screw
slightly until it is securely fitted into
the motor housing. (Fig 3)
3. Place the cutting blade onto the feed
screw shaft with the blade facing the
front as illustrated (Fig 4). If it is not
fitted properly the meat grinder will
not work properly.
4. Place the desired cutting plate or
blade into the feed screw when making sausages or juicing tomatoes (Fig 5).
5. Support or press the cutting plate with one finger then screw the fixing ring,
using your other hand (Fig 6) so that it securely fits. Ensure you do not over
tighten it.
6. Place the hopper plate onto the head and fix it into position.
7. Place the unit on a firm level surface.
8. Ensure that the meat grinder has ample space and that the meat grinder has
an air passage at the bottom and side of the motor housing.