Andrew James AJ000131 Hand Mixer User Manual
Page 5
5
Operating Instructions
The appliance is designed to work using a standard household voltage only.
Please check that the current indicated on the rating label corresponds to
the current of the mains socket.
Using the appliance
1.
Place the ingredients into a bowl.
2.
Set the speed control to the “0” position.
3.
Attach the beaters or attachments into the correct holes
located on the underside of appliance main body.
4.
Insert the mains plug into the socket, place the beaters into
the bowl, then select the speed required on the speed
controls.
5.
Please use slow speeds (1-2) to initially mix for around 30
seconds, then you can change to a higher speed settings if
needed. The hand mixer must be switched off and left to rest
for 20 minutes after 5 minutes of continuous use.
Please note
Failure to insert the correct attachment into the correct hole in the mixer will
result in the attachment becoming stuck. The beater attachments do not have a
stopper.
Please use the diagram above the holes on the appliance to indicate which
correct attachment to insert.