Kendall Howard 1911-3-000-41 41U 2-Post Cable Cove Rack - Manual

Copyright 2004 Kendall Howard LLC All Rights Reserved
Cable Cove
Assembly Instructions
Step 1
Remove all contents from the box and make sure all of the
following parts are accounted for.
Box Contents
2 Vertical Rails
2 Base Plates
2 Upper Channels
24 Bolts
24 Washers
24 Nuts
Tools Required
5/16 Wrench
Step 2
Place each bolt into the washer, insert into assembly hole
and attach with nut. Keep all bolts finger tight until the
entire frame is assembled.
Step 3
Tighten all bolts.