Kendall Howard 1932-3-201-12 12U Compact SOHO Server Cabinet - No Doors - Manual

Copyright 2004 Kendall Howard LLC All Rights Reserved
8U and 12U SOHO
Installation Instructions
Step 1
Remove all contents from the box and make sure all
of the following parts are accounted for.
Box Contents
2 Doors (not included with No Door Version)
4 Casters
1 Caster Hardware Pack
1 Fan Power Cord
4 Hinge Sets and Hardware
(not included with No Door Version)
1 Instruction Sheet
Tools Required
Cross head screw driver
Step 2
Install the female hinge side on the left
side of the front and back of the cabinet.
The bottom hinge should point up. The
hole should be facing up on the top of the
hinge.
Step 3
Install the male
hinge with the point
down on the door
using 4 screws.
STEP 4
Install the rails using the provided bolts and nuts. It
may be tricky to get the nut behind the rail holder so
take your time. It may help to lay the cabinet on its
side for this step.
STEP 5
Install the casters with the provided hardware
STEP 6
Plug the fan cord into the fan