Kendall Howard 5500-3-100-04 Training Table SFF CPU Holder - Manual (Page 2)

Tools Needed:
2
Screw Driver
(1) 50” Velcro Strap
(4x) 1/4-20 Screws
Assembly - Step 1:
Included:
Fit on/around lower part of the inside or outside
of the table leg
Assembly - Step 2:
Assembly - Step 3:
3
Line up holes, insert 1/4” screws and secure
Utilize Velcro strap to secure CPU to CPU Holder by lacing
through any of the 10 tie points