SM Pro Audio MC03: Valve Microphone User Manual
Page 7
7
Installation & Connections
3.2 Power supply
The SM MC03 has a professional external power supply. On one side of the power supply there
is the microphone cable connectors and polar pattern selctor switch. On the other side of the
power supply is the power switch and mains power cable connector slot.
3.3 Connecting the required cables
• Connect the microphone to the power supply
Using the included special 7 pin microphone cable, connect one end of the cable to the base of
the MC03 microphone, and the other to the connector labelled “MIC IN” on the front of the dedi-
cated power supply unit.
• Connect the powersupply microphone output to your mixer or recording device of choice
Using a standard microphone cable, connect one end of the cable to the connector labelled
“OUT” on the front of the dedicated power supply unit, and the other to the input connector of
your mixer of other recording device.
We strongly suggest you use a high quality cable. The cable should be as short as it can be
practically be in your situation. Long cables may adversely affect sound quality.
• Connect the Mains Lead from the Power Supply socket to your mains power.
Connect one end of the included power cable to the rear of the dedicated power supply to the
connector labelled either “110V” or “220V” (depending on which country you purchased the MC03
in), and the other to your mains power source.