Cla-Val X101AR - Manual

Installation
The Model X101AR
Valve Position Indicator
with Air Release Valve
can be installed on any
Cla-Val basic main valve
in a matter of minutes.
Simply remove the fitting
on top of the valve,
thread in the X101AR
stem to the main valve
stem, then thread the
indicator housing onto
the main valve cover.
For automatic air release operation, unscrew air
bleed screw at least one turn off of seat.
The air release valve cannot be retrofitted to an
existing X101 Valve Position Indicator.
Valve Position Indicator with Air Release Valve
X101AR
• Automatically Relieves Air in Cover Chamber
• Positive Visual Valve Position Indicator
• Maximum Pressure 225 psi
• Stainless Steel Construction
CLA-VAL
Copyright Cla-Val 2013 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
©
Valve Cover
Indicator Housing
Air Release Valve
3.15”
“A” Max
Internal
Float
Air Bleed Screw
Stem
E-X101AR (R-10/2013)
Air Release Valve
Indicator
Housing
Air Bleed
Screw
When Ordering, Please Specify
1. Valve Size
2. Catalog No. X101AR
3. Valve Series No. (Appears on Valve Nameplate)
Specifications
Sizes: 1" thru 16; Consult Factory for larger sizes
Materials: Stainless Steel, Pyrex Tube
Pressure Rating: 225 psi
Max Temperature: 180 ° F
Valve
Size (Inches)
“A” Max
Inches
1 ” 8-1/2 ”
1-1/4 ” 8-1/2 ”
1-1/2 ” 8-1/2 ”
2 ” 9 ”
3 ” 9 ”
4 ” 10 ”
6 ” 10 ”
8 ” 11-1/2 ”
10 ” 13-1/2 ”
12 ” 14 ”
14 ” N/A
16 ” 16-1/2 ”