Cla-Val Ti 100GS - Manual

Ti 100GS
Seawater Version
Titanium Deluge Valve
MODEL
"Fluid Control at It's Best"
• U.L. and U.L.C. Listed/ABS Approved
• Globe Pattern
• Proven Reliable Design
The Cla-Val Model Ti 100GS Deluge Valve is designed for use in controlling water
flow to Deluge, Pre-Action, or Foam-Water type fire protection sprinkler systems. This
valve is U.L. Listed in "Special Systems Water Control Valves Class I (VLFT)". The
Model Ti 100GS is a hydraulically-operated, diaphragm-actuated, globe or angle pat-
tern Deluge Valve. It consists of three major components: the body, the cover, and the
diaphragm assembly. The only moving part is the diaphragm assembly. Packless con-
struction and simplicity of design assures long service life and dependable low main-
tenance for this valve.
The Ti 100GS are manufactured in materials suitable for seawater.
Typical Application
The Model Ti 100GS is installed to control the water flow to the sprin-
klers in Deluge, Pre-Action, or Foam-Water type systems. A sim-
plified system is used to illustrate typical operation.
The Model Ti 100GS Deluge Valve (3) is main-
tained in the closed position by means of sys-
tem water pressure controlled by a pilot con-
trol (4). When the pilot control valve receives
a signal from the fire detection system, it
allows the deluge valve to open. Firefighting
water (1) then enters system piping (5)
and discharges from sprinklers (6).
4
1
2
3
5
Sizes: Globe: 3" – 4" – 6"
End Details: ISO 7005-2 PN 10-16
150 ANSI B16.42 flanged
Pressure Rating: 26 bar max.
Temperature
Range:
Water, to 180°F MAX.
Material: Main Valve Body & Cover
Titanium ASTM B367 Grade C2
Standard Main Valve Trim:
Titanium ASTM B367, Grade C2
Diaphragm and Disc:
Buna-N, synthetic rubber
Specifications
1. Catalog No. Ti 100GS 2. Size
3. Pressure Class 4. Internal Trim Material
When Ordering, Please Specify
Friction Loss For use in hydraulically calculated
systems, friction loss equivalent to:
Ti 100GS (Globe):
3" Size=42 Ft. of 3" Pipe
4" Size=92 Ft. of 4" Pipe
6" Size=116 Ft. of 6" Pipe
(1) From System Water Supply
(2) System Shut-off Valve (Visual Stem)
(3) Cla-Val Model Ti 100GS
(4) Pilot Control System
(5) Sprinkler System Piping
(6) Sprinklers
Specifications Ti 100GS Seawater Service Option
Sizes
Globe: 3" - 4" - 6" flanged
D E S I G N
A S S E S S E D
Type Approved