Cla-Val 850GF Series - Manual

DESCRIPTION
The Pantograph is used for bottom loading of refueling trucks.
In conjunction with a Cla-Val Control Valve, Cla-Val Nozzle, with
the capability to fill refueling units at flow rates up to 600 GPM.
Pantograph consists of several sections, which are connected to
each other by CLA-VAL Flanged Swivel Joints. The dispensing
end consists of a swivel joint/pipe combination, which is
counterbalanced by an adjustable spring device, it can be
coupled to a tank truck with heights adjustable from of 1 ft. (0,3
m) 4 ft (1,2 m) above street level.
In the stored position the Pantograph is retracted in order to
save space.
The design of CLA-VAL Pantographs is a modular system.
Variations to the standard design are possible.
SPECIFICATION
Diameter: 3"(DN 80), 4"(DN 100), 6"(DN 150)
Pressure class: PN 10, 125 lbs
Pipe material: Stainless steel,
Total length: 9’ (3,0 m)
MATERIAL
Stainless steel
EQUIPMENT
Combination of Flanged Swivel Joints type C-GE-3F,
3”(DN80), 3 bearings, double sealed, made of
stainless steel, non-lubricated and maintenance free,
Type C-GE-3F/M, 4 bearings, double sealed, made of
stainless steel, non-lubricated.
3 -year leakage free warranty,
- Cla-Val Refueling Nozzle
- Counterbalance unit
- Locking device
CLA-VAL
Copyright Cla-Val 2005 Printed in USA Specifications subject to change without notice.
P.O. Box 1325 • Newport Beach, CA 92659-0325 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: [email protected] • Website cla-val.com
©
Bottom Loader Pantograph
850GF
• The Cla-Val PANTOGRAPH Model "Bottom Loader" is designed for bottom loading of all refueling trucks without
the necessity of using hoses.
SERIES
E-850GF Pantograph (R-8/05)
Refueling of tank trucks with bottom loading connection