Cla-Val X143HP - Manual

CLA-VAL CL A- VA L
CLA-VAL
X143HP
CL A- VA CL L A- V VA
X143HP
MODEL
Hydro-Powered Generator
Product Features
• Provides power by using the
pressure drop across a PRV to run
a generator
• Compact design easily adapts to
small, pre-existing vaults or new
installations
• No down time due to cloudy days
• Applications include powering
electronic control valves, RTUs,
monitoring equipment, sump pumps,
lighting; and pressure management
• Can also be used for hydro-powered
electronic monitoring
• Use one battery for 12 Volt or two
for 24 Volt requirements
• Additional batteries may be used to
store excess energy produced by
generator system
• Patent Pending
6
B
2 1
A
4 3
C
7
D
+ -
B
5
D
Schematic Diagram
Supplied Equipment
1 Power Generator Unit
2 Y-Strainer
3 Diversion Load
4 DC Charge Controller/Power Display
5 Circuit Breaker
Optional Equipment
A Control Valve:
• 90 Series Pressure Reducing Valve (PRV)
• or 40 Series Differential Limiting Valve
• or 49 Series Differential PRV (with sensing line)
B Isolation Ball Valve
C
Battery Housing
D Gauge
Customer Supplied Equipment
6 New or existing Pressure Reducing Valve
7 Battery(ies)
- - Wiring between 1 & 4, 3 & 4, and 4 & 7
- - Tubing between 1 and 6
Power Generator Envelope Dimensions
2) Generator Unit with Y-Strainer: 7” H x 7” W x 21” L
• Generator Unit with installed control valve = 25” H
3) Diversion Load: 16” H x 9” W x 4” D
4) DC Charge Controller/Display: 20 H x 20” W x 10” D
5) Battery Housing: 10.5” H x 10.5” W x 14” D
Power Generator Specifications
• 12V DC or 24V DC
• 35 PSI minimum differential pressure required
• 50 - 250 watts generator power output
• 1.25” NTP connection
CLA-VAL
X143HP
Global Headquarters
PO Box 1325
Newport Beach, CA 92659
800.942.6326 • 949.548.5441 • www.cla-val.com
1 & 2 3 4 C