Wash options, Multi-functional tablets, Delayed start – Hotpoint Ariston LFTA+ H204 HX User Manual

Page 19: Half load using the upper or lower rack

Advertising
background image

EN

19

Multi-functional tablets*

This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button. The corresponding indicator
light will illuminate. The “Multi-functional tablets” option results
in the lengthening of the wash cycle.

The MULTI-FUNCTIONAL TABLETS option remains set

for subsequent wash cycles if it is not deselected.

The use of tablets is only recommended for models

which offer the MULTI-FUNCTIONAL TABLETS option.

This option is not recommended for use with wash

cycles which do not specify the use of multi-functional
tablets

(

see Table of options).

*

Only available in selected models.

A

B

C


Table of options

Delayed

Start

Half

Load

Tabs

1. Eco

Yes

Yes

Yes

2. Auto Normal

Yes

Yes

Yes

3. Daily wash

Yes

Yes

Yes

4. Soak

Yes

Yes

No

5. Auto Super Wash

Yes

Yes

Yes

6. Rapid

Yes

No

Yes

7. Crystal

Yes

Yes

Yes

8. Auto Duo Wash

Yes

No

Yes

9. Ultra Intensive

Yes

Yes

Yes

10. Special Guest

Yes

Yes

No

Wash options

If an option is not compatible with the selected was cycle
(

see Table of wash cycles), the corresponding LED flashes

rapidly 3 times and 2 short beeps will sound.

Delayed start

It is possible to delay the start time of the cycle by 3, 6 or 9
hours.
1. Press the DELAYED START button: every time it is pressed
a buzzer sounds and the selected period of time is displayed.
2. Select the wash cycle and shut the door: after the beep
sounds, the timer begins counting down.
3. Once this time has elapsed, the indicator light switches off
and the wash cycle begins.
To adjust the delay time and select a smaller period of time,
press the DELAYED START button. To cancel it, press the
button repeatedly until the selected delayed start indicator
light switches off. The wash cycle will start automatically as
soon as the door is shut.

Half load using the upper or lower rack

*

If there are not many dishes to be washed, a half load cycle
may be used in order to save water, electricity and detergent.
Select the wash cycle and press the HALF LOAD button
repeatedly: the triangle corresponding to the selected load will
illuminate and the wash cycle will take place only using the
upper or the lower rack.

The Half load option is not compatible with the Rapid/

Speed wash.

Remember to load the upper or lower rack only, and to

reduce the amount of detergent accordingly.

Advertising