GEARENCH LA16H (2-2 chain) PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
4 41.84 13,500 3,880
5 42.13 15,500 4,400
6 42.42 17,000 4,800
7 42.71 17,000 4,780
8 43.00 17,000 4,760
9 43.29 17,100 4,740
10 43.58 17,100 4,720
11 43.86 17,200 4,700
12 44.15 17,200 4,690
13 44.44 17,300 4,670
14 44.73 17,400 4,660
15 45.02 17,400 4,650
16 45.31 17,500 4,640
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.