GEARENCH LA116-23 PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
6 29.22 58,400 24,000
6-1/2 29.36 58,500 23,900
7 29.51 58,700 23,900
7-1/2 29.65 58,800 23,800
8 29.80 59,000 23,800
8-1/2 29.94 59,100 23,700
9 30.09 59,300 23,700
9-1/2 30.23 59,500 23,600
10 30.38 59,700 23,600
10-1/2 30.52 59,900 23,500
11 30.66 60,000 23,500
11-1/2 30.81 60,200 23,500
12 30.95 60,400 23,400
12-1/2 31.10 60,600 23,400
13 31.24 60,800 23,400
13-1/2 31.39 61,000 23,300
14 31.53 61,200 23,300
14-1/2 31.67 61,400 23,300
15 31.82 61,600 23,200
15-1/2 31.96 61,800 23,200
16 32.11 62,000 23,200
16-1/2 32.25 62,300 23,200
17 32.40 62,500 23,100
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.