Torque and diameter capacity – GEARENCH LA116-28 PETOL Bull Tong User Manual
Page 16
![background image](/manuals/316393/16/background.png)
14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
6 34.22
56,100
19,700
6-1/2 34.36
56,200
19,600
7 34.51
56,300
19,600
7-1/2 34.65
56,500
19,600
8 34.80
56,600
19,500
8-1/2 34.94
56,700
19,500
9 35.09
56,800
19,400
9-1/2 35.23
56,900
19,400
10 35.38
57,100
19,400
10-1/2 35.52
57,200
19,300
11 35.66
57,400
19,300
11-1/2 35.81
57,500
19,300
12 35.95
57,600
19,200
12-1/2 36.10
57,800
19,200
13 36.24
57,900
19,200
13-1/2 36.39
58,100
19,200
14 36.53
58,300
19,100
14-1/2 36.67
58,400
19,100
15 36.82
58,600
19,100
15-1/2 36.96
58,700
19,100
16 37.11
58,900
19,000
16-1/2 37.25
59,100
19,000
17 37.40
59,200
19,000
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.