GEARENCH LA116HX PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
30-1/8 48.04 83,100 20,800
32 48.29 82,700 20,600
34 48.56 82,300 20,300
36 48.82 82,000 20,200
38 49.09 81,700 20,000
40 49.36 81,400 19,800
42 49.63 81,200 19,600
44 49.90 80,900 19,500
46 50.16 80,700 19,300
48 50.43 80,600 19,200
50 50.70 80,400 19,000
52 50.97 80,200 18,900
54 51.24 80,100 18,800
56 51.50 80,000 18,600
58 51.77 79,900 18,500
60 52.04 79,800 18,400
62 52.31 79,800 18,300
64 52.57 79,700 18,200
65-7/8 52.83 79,700 18,100
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.