GEARENCH LA120 PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter Capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Dia.
Torque
Arm
Length
(Short)
(inches)
Max.
Torque
(Short)
(ft-lbs)
Max.
Line Pull
(Short)
(pounds)
Torque
Arm
Length
(Long)
(inches)
Max.
Torque
(Long)
(ft-lbs)
Max.
Line Pull
(Long)
(pounds)
6 38 135,600 42,800 77 131,200 20,400
7 38 151,500 47,900 77 143,900 22,400
8 38 155,900 49,200 77 144,800 22,600
9 38 156,600 49,500 77 145,500 22,700
10 38 157,100 49,600 77 145,900 22,700
11 38 157,400 49,700 77 146,200 22,800
12 38 157,600 49,800 77 146,400 22,800
13 38 157,800 49,800 77 146,500 22,800
14 38 157,800 49,800 77 146,600 22,800
15 38 157,900 49,900 77 146,600 22,900
16 38 157,900 49,900 77 146,600 22,900
17 38 157,900 49,900 77 146,600 22,900
18 38 157,900 49,900 77 146,600 22,900
19 38 157,900 49,900 77 146,600 22,900
20 38 157,900 50,000 77 146,600 22,900
21 38 157,900 50,000 77 146,600 22,900
22 38 158,900 50,100 77 146,600 22,900
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.