GEARENCH LA116H PETOL Bull Tong - Manual (Page 22)

20
Wear Limits
The following table indicates limiting diameters on the components of the PETOL™ Bull
Tong. When localized wear is beyond any one of the limits indicated, the component should
be replaced.
Part
Number
Description Location Limit Dimension
HP249 Jaw – handle pin Pin body diameter 1.485 (min)
HP234 Chain – handle pin Pin body diameter 0.985 (min)
HB52 Chain splice bolts Bolt body diameter 0.615 (min)
161-45-XX Chain links Pin hole diameter 0.640 (max)
161-45-XX Chain links Pitch center – center 1.738 (max per pitch)
LH116H Handle Jaw pin hole diameter 1.525 (max)
LH116H Handle Chain pin hole
diameter (master link) 1.025 (max)
LH116H Handle Load loop diameter 2.125 (max)
LJ116H Jaw Jaw pin hole diameter 1.525 (max)