GEARENCH U118115H PETOL HYDRA-TORK User Manual
Page 3
3
Petol U118-115H Hydra-Tork Description
The U118-115H Petol Hydra-Tork unit was designed for making up and breaking out
downhole tools. The unit is equipped with two tongs and vises on one base and powered by
one hydraulic console. The 118 tong and vise are rated for operation on 4” to 24” diameters
with a maximum working load of 90,000 ft-lb. The 115H tong and vise are rated for use on
2" to 8" diameters with a maximum working load of 14,000 ft-lb.
The Petol Pulldown Visetong and Petol Tongvise are adjusted to the different ODs within
their range by pulling the Petol Special Chain through the jaw and engaging a cam lock
lever. No addition or removal of chain sections is required.
The U118-115H also offers the following features:
A shock mounted hydraulic console not attached to the base to provide maximum
flexibility in the setup and location of the power unit for efficient use of shop space.
All controls are 24 volts AC, NEMA type 13.
The tong cylinder and vise base are mounted on tracks for switching from make up to
break out.
One adjustable vee-saddle mounted on the hydra-tork base for added support. This
vee-saddle is also mounted on tracks for easy adjustment.
Operating voltages are 208/240/460 volts, 3 phase, 10 horsepower. 277/380 volts, 3
phase, 10 horsepower is available upon request.