AAEON PCMCIA_CompactFlash - Manual (Page 5)

User’s Manual
5
Product Overview
There are five models in our product series. Three are ATA to IDE
drives, one is a CompactFlash to IDE drive and one is a combination
PC/104 PCMCIA/CompactFlash (ATA) to IDE Module.
ATA to IDE Drives
The ATA to IDE drives allow Type I/II/III ATA Flash and ATA HDD
PCMCIA cards to be accessed by a standard desktop computer. The
PCM-3116PC/F PCMCIA (ATA) to IDE drive and the
PCM-3116PC/R PCMCIA (ATA) to IDE card are very similar, with
the former being able to be mounted in a 3.5” disk drive bay while the
latter occupies an ISA slot for card access via the rear of the computer.
Common Specifications
• Complies with PCMCIA v. 2.1 / JEIDA 4.1 standards
• ATA to IDE interface
• 40-pin IDE connector
• 4-pin standard power connector
• Supports Type I/II/III ATA Flash, ATA HDD and CompactFlash
cards
• 5 V, 70 mA power consumption (typical)
• 0° C to 70° C operating temperature range