AAEON PCM-3660 Rev.B - Manual (Page 9)

P C / 1 0 4 P e r i p h e r a l M o d u l e P C M - 3 6 6 0 R e v . B
PCM-3660 Rev.B Quick Installation Guide 1-9
2. At the prompt type RSET8019.exe and press <Enter>. Then the
Ethernet configuration program will be displayed.
3. A simple screen displays the available options for the Ethernet
interface. Highlight the option you are going to change and using the
Up and Down keys. To change a selected item press <Enter>, and a
window will show the available options. Highlight your selection and
press <Enter>. Each highlighted option has a helpful message guide
displayed at the bottom of the screen for additional information.
4. After you have made your selections and you are sure that this is
the configuration you want, press <ESC>. A prompt will appear
asking if you want to save the configuration. Press Y if you want to
save.
The Ethernet Setup Menu also offers three very useful diagnostic
functions. These are:
1. Run EEPROM test.
2. Run Diagnostics on Board.
3. Run Diagnostics on Network
Each option has its own display screen which shows the format and
result of any diagnostic tests undertaken.
Remote boot ROM (P/N: PCL-843-ROM)