AAEON PFM-P13DW2 - Manual

P C / 1 0 4 P o w e r S u p p l y P F M - P 1 3 D W 2
PFM-P13DW2 Quick Installation Guide 1
Notice
This guide is designed for experienced users to setup the
system in the shortest time.
Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working
on it. Do not make connections while the
power is on, because a sudden rush of power
can damage sensitive electronic
components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap
at all times. Place all electronic components
on a static-dissipative surface or in a
static-shielded bag when they are not in the
chassis
Part No. 2007P13D11 Printed in Taiwan, October 2008