AAEON PFM-540I Rev.А - Manual (Page 44)

P C 1 0 4 C P U M o d u l e P F M - 5 4 0 I
Chapter4 Drivers Installation 4 - 7
4.6 Installing Ethernet Driver
1. Click on the Step 4 –Install Lan folder.
2. Double click on the Setup file located in the folder.
3. Follow the instructions that the window shows.
4. The system will help you install the driver automatically.
4.7 Ethernet Software Configuration
The onboard Ethernet interface supports all major network
operating systems. I/O addresses and interrupts are easily
configured via the Insyde BIOS Setup. To configure the medium
type, to view the current configuration, or to run diagnostics, please
refer to the following instruction:
1. Power the main board on. Ensure that the RSET8139.EXE file
is located in the working drive.
2. At the prompt, type RSET8139.EXE and press <ENTER>.
The Ethernet configuration program will then be displayed.
3. This simple screen shows all the available options for the
Ethernet interface. Just highlight the option you wish to
change by using the Up and DOWN keys. To change a
selected item, press <ENTER>, and a screen will appear with
the available options. Highlight your option and press
<ENTER>. Each highlighted option has a helpful message