AAEON PFM-HDS - Manual (Page 96)

P C / 1 0 4 M o d u l e P F M - H D S
Appendix D AHCI Setting D-2
D.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: Copy files from “Driver DVD -> Step6 –
AHCI(Optional)\WinXP_32” to diskette.
Step 2: Connect the USB Floppy drive to the board and insert the
diskette from previous step.
Step 3: Configure SATA Controller to AHCI mode in BIOS SETUP
Step 4: Boot to DVD/CD-ROM device to install OS
Step 5: Press “F6” to install AHCI driver