Signal – AAEON GENE-9455 Rev.А User Manual
Page 31
S u b C o m p a c t B o a r d
G E N E - 9 4 5 5
Chapter 2 Quick Installation Guide
2-19
2.26 LVDS Connector (CN13)
Pin Signal
Pin Signal
1
Back-Light Enable
2
Back-Light Control / N/C
3 LCD
Volt.
4 Ground
5 LA_CLK#
6 LA_CLK
7 LCD
Volt.
8 Ground
9 LA_DATA#_0
10
LA_DATA_0
11 LA_DATA#_1
12 LA_DATA_1
13 LA_DATA#_2
14 LA_DATA_2
15 N/C
16 N/C
17
LVDS_DATA / N/C
18
LVDS_CLK / N/C
19 LB_DATA#_0
20 LB_DATA_0
21 LB_DATA#_1
22 LB_DATA_1
23 LB_DATA#_2
24 LB_DATA_2
25 N/C
26 N/C
27 LCD
Volt.
28 Ground
29 LB_CLK#
30 LB_CLK
2.27 LVDS Inverter Connector (CN14)
Pin
Signal
1
+5 Volt. / +12 Volt.
2 Brightness
Control
3 Ground
4 Ground
5 Backlight
Enable
Note: For the 5V version of GENE-9455 A2.1:
If the LCD panel is using +12V LVDS Inverter and the IDD of the Panel is more
than 500mA at +3.3V, the panel will need to connect an external power supply
or the LVDS Inverter Connector (CN14) on the board will has no function.