AAEON EMB-H81A - Manual (Page 41)

3-8 EMB-H81A
CPU Smart Fan Control [Disabled]
Allows you to enable or disable the CPU Smart Fan Control.Configuration
options: [Enabled] [Disabled]
Chassis Smart Fan Control [Disabled]
Allows you to enable or disable the Chassis Smart Fan Control.Configuration
options: [Enabled] [Disabled]
3.3.9 Dynamic Digital IO
Allows you to change the Dynamic Digital IO.
GPIO 1~4 [Input]
Allows you to set the GPIO 1~4 as Input or Output. Configuration options: [Input]
[Output]
GPIO 5~8 [Output]
Allows you to set the GPIO 5~8 as Input or Output. Configuration options: [Input]
[Output]
Output Level [Hi]
Allows you to set the Output Level as high or low. Configuration options: [Hi] [Low]
3.3.10 Power Management
The items in this menu allow you to change the Power Management features.
Power Mode [ATX Type]
Allow you to select the power supply mode. Configuration options: [ATX Type] [AT
Type]
Power Failure [Last State]
Allows you to set the NCT6791D power failure feature. Configuration options:
[Always Off] [Always On] [Last State]
Resume from RI [Enabled]
Allows you to enable or disable resume from RI. Configuration options: [Disabled]
[Enabled]
S5 RTC ake Settings [Enabled]
Wake system with Fixed Time [Disabled]
Allows you to enable or disable system wake up on alarm event When
enabled, the system will wake up on hr::min::sec specified . Configuration
options: [Disabled] [Enabled]