AAEON EMB-Q77B - Manual (Page 25)

2-17 Chapter 2: Motherboard information
5. Line In port (light blue). This port connects the tape, CD, DVD player, or
other audio sources.
6. Line Out port (lime). This port connects to a headphone or a speaker. In a
4-channel, 6-channel and 8-channel configurations, the function of this port
becomes Front Speaker Out.
7. Microphone port (pink). This port connects a microphone.
NOTE: Refer to the audio configuration table below for the function of the
audio ports in the 2.1, 4.1, 5.1, or 7.1-channel configuration.
Audio 2.1, 4.1, 5.1, or 7.1-channel configuration
Port
Headset
2.1-
channel
4.1-channel 5.1-channel 7.1-channel
Light Blue
(Rear panel)
Line In
Rear
Speaker Out
Rear Speaker
Out
Rear Speaker Out
Lime (Rear panel) Line Out
Front
Speaker Out
Front Speaker
Out
Front Speaker Out
Pink (Rear panel) Mic In Mic In Bass/Center Bass/Center
Lime (Front panel) - - - Side Speaker Out
To configure a 7.1-channel audio output:
Use a chassis with an HD audio module in the front panel to support an
7.1-channel audio output.
8. USB 3.0 ports. These two 9-pin Universal Serial Bus (USB) ports connect to
USB 3.0/2.0 devices.
NOTES:
• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing
Windows ® operating system.
• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used
under Windows ® OS environment and after the USB 3.0 driver installation.
• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0
ports for faster and better performance for your USB 3.0 devices.