AAEON EMB-B75A - Manual (Page 28)

EMB-B75A 2-20
6. USB 3.0 connector (20-1 pin USB3_23)
This connector is for the additional USB 3.0 ports. Connect the USB 3.0
bracket cable to this connector, then install the USB 3.0 bracket to the
rear side of the chassis. If your chassis support customized front panel
installation, with USB 3.0 header, you can have a front panel USB 3.0
solution.
NOTES:
• The USB 3.0 module is purchased separately.
• Due to Intel
® limitations, the USB3_34 only supports Windows ® 7 operating
system.
EMB-B75A USB3.0 Front panel connector
USB3_23
+5V USB3_RX_DN3 USB3_RX_DP3 GND USB3_TX_DN3 USB3_TX_DP3 GND S_USB_PN2_R S_USB_PP2_R GND
PIN 1
+5V
USB3_RX_DN2 USB3_RX_DP2
GND
S_U3TXDN4 S_U3TXDP4
GND
S_U3RXDP4 S_U3RXDN4