2 pch-io configuration, Pch-io configuration -12 – AAEON IMBM-Q87A User Manual
Page 42
3-12
IMBM-Q87A
3.4.2
PCH-IO Configuration
Power Mode [ATX Type]
This item selects Power Supply Mode.
Configuration options: [ATX Type] [AT Type]
Resume on Ring [Enabled]
This item disables/enables resuming system on ring.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Power Mode to [ATX Type].
Restore AC Power Loss [Power Off]
[Power On]
The system goes into on state after an AC power loss.
[Power Off]
The system goes into off state after an AC power loss.
[Last State]
The system goes into either off or on state, whatever
the system state was before the AC power loss.
ERP/EUP mode [Disabled]
This item disables/enables ERP/EUP mode for energy star compliance.
Configuration options: [Disabled] [Enabled]
Intel WGI210AT Speed / Intel I217LM Speed / Asmedia ASM1085 Speed / PCIe
x4 port Speed [Auto]
Each item configures the speed of a specific PCI Express port.
Configuration options: [Auto] [Gen1] [Gen2]