AAEON AIS-E2-CV1 - Manual (Page 64)

A d v a n c e d S ys t e m
C o n t r o l l e r
A I S - E 2 - C V 1
Appendix C AHCI Setting C-2
C.1 Setting AHCI
OS installation to SETUP AHCI Mode
Step 1: C
opy below files from “Driver CD -> Step 5 – AHCI\Floppy” and to
diskette.
Step 2: Connect the USB Floppy drive to the system and insert the diskette
from previous step.
Step 3: Configure SATA Controller to AHCI mode in BIOS SETUP Menu:
Advanced -> IDE Configuration -> SATA Mode -> AHCI Mode