AAEON AEC-6930 - Manual (Page 46)

E m b e d d e d C o n t r o l l e r A E C - 6 9 3 0
Chapter 4 Drivers Installation 4 - 3
4.1 Installation
Insert the AEC-6930 CD-ROM into the CD-ROM Drive. The
Autorun program will run automatically. You also can choose the
drivers to install from step 1 to step 4 in order as following
instructions.
Step 1 – Install INF Driver
1. Click on the Step 1-chip folder and then double click on
the infinst_autol.exe
2. Follow the instructions that the window will show you
3. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the Step 2-vga folder and select the OS your
system is
2. Double click on the .exe file located in each OS folder
3. Follow the instructions that the window shows you
4. The system will help you install the driver automatically
Caution:
In AAEON products with Intel embedded graphics chipset, when system
booting before CRT / LCD monitor has disconnected to VGA, it will cause
Intel graphics chipset automatically detected without CRT / LCD
connection and set CRT output to disable. Therefore, CRT / LCD screen
will go black and never recovered on Windows.
Because it's a limitation on application for Intel embedded graphics driver
under Windows XP. Therefore, there is a simply way to recover CRT / LCD