AAEON AIS-Q574 - Manual (Page 22)

Ad v a n c e d S y s t e m
C o n t r o l l e r
A I S - Q 5 7 4
2.6 Auto PWRBTN Selection (JP1)
JP1 Function
1-2 Use Auto PWRBTN
2-3 Don’t Use Auto PWRBTN (Default)
2.7 CMOS Setting (JP2)
JP2 Function
1-2 Normal (Default)
2-3 Clear CMOS
2.8 TPM Setting (JP3)
JP3 Function
1-2 Save ME RTC Register (Default)
2-3 Clear ME RTC Register
2.9 BIOS Load Optimized Defaults Selection (JP4)
JP4 Function
1-2 Enable (Default)
2-3 Disable
2.10 Front Panel Connector (FP1)
Pin Signal Pin Signal
1 Power On Button (-) 2 Power On Button (+)
3 HDD LED(-) 4 HDD LED(+)
5 External Speaker (-) 6 External Speaker (+)
7 Power LED (-) 8 Power LED (+)
9 Reset Switch (-) 10 Reset Switch (+)
Chapter 2 Hardware Installation 2-8