AAEON GENE-1350 - Manual

12-1
12
www.aaeon.com
Features
RIS
C C
PU
Mod
ules
Specifications
Board Packing List
Kit Packing List
RISC CPU Board With TI OMAP™ 3503/3530 Processor
System
Form Factor 3.5"
Processor TI OMAP™ 3503/3530 600 MHz
System Memory Onboard 128/256 MB (Optional) LP DDR RAM
Ethernet Davicom DM9000AEP, 10/100Base-TX, RJ-45 x 1
Boot Loader Microsoft Windows® CE 6.0 or Linux - Kernal 2.6.32
Watchdog Timer Generate a time-out system reset
Expansion Interface Mini Card (with USB interface only) x 2, Proprietary Expansion Slot x 1
Battery Lithium battery
Battery Charger Linear tech LTC4100
Power Requirement +9V to +24V DC
Power Consumption
(Typical) TI OMAP™ 3530, 128/256 MB LP DDR,
0.24A@+12V
Board Size 5.75"(L) x 4"(W) (146mm x 101.6mm)
Gross Weight 0.88 lb (0.4 kg)
Operating Temperature
32 °F ~ 158°F (0°C ~ 70°C)
-4 °F ~ 158°F (-20°C ~ 70°C) for WiTAS 1
-40 °F ~ 176°F (-40°C ~ 80°C) for WiTAS 2
Storage Temperature -40 °F ~ 176°F (-40°C ~ 80°C)
Operating Humidity 0% ~ 90% relative humidity, non-condensing
MTBF (Hours) 100,000
Display
Chipset TI OMAP™ 3
Resolutions
Up to 1280 x 768 for LCD
Up to 1024 x 768 for CRT
LCD Interface Up to 18-bit single channel TTL/LVDS LCD
I/O
Storage 256MB NAND Flash, SD, MicroSD
Serial Port RS-232 x 1, RS-232/422/485 (auto flow) x 1, TTL UART x 1
Universal Serial Bus USB2.0 Host x 2, USB2.0 Client x 1
Digtial I/O Supports 8-bit (Programmable)
Audio Line-in, Line-out, Mic-in, Speaker-out (1W Amplifier)
Touch Screen Supports 4-wire resistive touch screen
Keypad Interface Supports 6 x 6 matrix keypad
Motion Sensor ST LIS35DE
• 9657666600
Jumper Cap
• Product CD
• GENE-1350
• TF-GENE-1350-A10 Board, Carry Case, 7” Display, Power Supply, Windows® CE
6.0 License & Cables
• Product CD
• Battery Module (TF-SKC-1350-002 Kit Only)
GENE-1350
■ ■ TI OMAP™ 3503/3530 Processor
■ ■ 3D Graphics & Video Accelerator Support with 3530 Processor
■ ■ Onboard 128/256 MB (Optional) LP DDR RAM
■ ■ 10/100Base-TX Ethernet
■ ■ CRT/ 24-bit TTL LCD/ 18-bit LVDS LCD
■ ■ 2CH Audio
■ ■ Onboard NAND Flash, SD, MicroSD
■ ■ USB2.0 Host x 2, USB2.0 Client x 1, COM x 2, 8-bit Digital I/O
■ ■ Mini Card x 2, Proprietary Expansion Slot x 1
■ ■ Onboard 4-wire Resistive Touch Screen Controller
■ ■ +9V To +24V DC Input
■ ■ Onboard Battery Charger
■ ■ Windows® CE 6.0/ Linux 2.6.32/ Android 2.2
■ ■ Less Than 3 Watt Power Consumption
■ ■ Operating Temperature: W2: -40°C ~ 80°C, W1: -20°C ~ 70°C
LVDS LCD
LAN USB Client COM USB CRT
Micro SD
Camera Speaker
Power Input
Audio
Battery
TTL LCD
Inverter
Mini Card
Proprietary Expansion
Touch Screen
JTAG
Mini Card
COM
SIM
TTL UART
Digital I/O