AAEON PICO-CV01 - Manual (Page 71)

P I C O - I T X B o a r d P I C O - C V 0 1
4.1 Installation:
Insert the PICO-CV01 CD-ROM into the CD-ROM drive. And install
the drivers from Step 1 to Step 7 in order.
Step 1 – Install Chipset Driver
1. Click on the STEP1-CHIPSET folder and select the OS
folder your system is
2. Double click on the infinst_autol_1034.exe file located in
each OS folder
3. Follow the instructions that the window shows
4. The system will help you install the driver automatically
Step 2 – Install VGA Driver
1. Click on the STEP2-VGA folder and double click on the
Setup.exe file
2. Follow the instructions that the window shows
3. The system will help you install the driver automatically
Note 1:
 This motherboard supports VGA and LVDS display devices. In
Single Display mode, use the hot keys to switch between VGA to
LVDS device or vice versa. By default, press
<Ctrl>+<Alt>+<F1> to switch to VGA device and press
<Ctrl>+<Alt>+<F3> to switch to LVDS device.
Note 2:
 VGA Driver for Windows ®
XP is not available for this motherboard.
Chapter 4 Driver Installation 4 -3