AAEON ACP-5210 User Manual
Page 78
Advertising
M u l t i - T o u c h P a n e l P C
A C P - 5 2 1 0
Appendix D AHCI Setting
D-2
D.1 Setting AHCI
OS installation to setup AHCI Mode.
Step 1: Copy the files
below from “Driver DVD -> STEP4 -
AHCI\WinXP\SB8xx_RAID_XP_3.2.1540.92
” to Disk
Step 2: Connect the USB Floppy to the board (The board on the photo is
just for reference)
Advertising