ABUS AZ6302 Terxon GSM dialer - Manual (Page 60)

60
6.2 Inputs A-H (TRIG)
Connect the inputs A-H with the outputs on the alarm centre. This alarm centre
switches transistor outputs if events occur and triggers the GSM dialer inputs.
The GSM dialer then initiates the call and forwards the voice or text message
to the corresponding telephone number.
IMPORTANT:
For triggering, all inputs must have the same polarity. Polarity settings are
made under “System Options >>> Polarity”.
6.2.1 Positive trigger
In order for a positive trigger to be made, a 12 V DC signal must be present on
an input.
6.2.1.1 NO wiring
6.2.1.2 NC wiring