ABUS FU9080 Privest Wireless Outdoor Siren - Manual (Page 17)

17
Programming
The following section also appears in the installation instructions. Up to 3 wireless
sounders (external or internal) can be trained for the system .
Read these instructions carefully before starting with programming.
Programming menu
To enter the Siren menu:
In the programming menu, press [9] to access the Siren menu.
[9] [1] Allocation
The sounder must be trained for the wireless alarm system.
Programming the sounder
1. After opening the Siren menu, press [1] to access the Allocation
menu.
2. Select the ID number of the sounder.
3. Press
the button to select the sounder type and then press Enter:
Φ NONE: No sounder
Φ ODWS1: External wireless sounder
Φ INDWS1: Internal wireless sounder
IMPORTANT:
If you select NONE as the type, you are asked whether you want to delete
the sounder.
4. Press to select whether the sounder should be audible on alarm
[Y] or not [N] and press Enter [#].
5. Press to select whether the sounder should emit an audible signal
to confirm activation or deactivation [Y] or not [N] and press Enter [#].
6. Press to select whether the sounder should emit a visual signal to
confirm activation or deactivation [Y] or not [N] and press Enter [#].
IMPORTANT:
The setting for the visual signal is possible only for the external wireless
sounder.