Recording, Schedule – ABUS TVHD80010 Operating instructions User Manual

Page 97

Advertising
background image

Recording

97

Recording

Setting up

Open the main menu and click on record:

Schedule

The schedule is used to specify the recording times and
triggers (recording type) for the cameras. Click on the
“Schedule” tab:

Note

Because there is no difference between the set-
tings for the TABs record and instant image, these
are only listed once.

In the OSD, the hours of the respective days are listed
from left to right (the days are listed from top to bottom).
A colour key is shown underneath the days (i.e. the re-
cording periods in the schedule are shown in colour ac-
cording to the trigger (recording types)).

Colour symbol

Key

Blue

Normal recording: Period in hours

Yellow

Motion detection

Light blue

Motion detection and alarm

Red

Alarm

Grey

No selection

Brown

Motion or alarm

Select 

the

 camera and click on the check box Enable 

Schedule. 

Click on Edit to specify the type and duration of the 
time plan 



1. Define the day to be set in the pull-down menu at

‘Schedule’.

2. Activate/deactivate ‘All day’. If the full day is active, no

definite times can be entered as the setting is now
valid for the whole day.

3. To make specific time settings, deactivate the “All

Day” box.

4. Specify the recording type in the drop-down menu:

 Time
 Motion

detection

 Alarm
 Motion detection or alarm
 Motion detection and alarm

5. When making a specific time setting, you can define

up to 8 time periods (each from 00:00 to 24:00). The
times in the individual periods must not overlap.

Note
The “Time” recording type defines the time win-
dow where a recording is made.

The other events (e.g. motion detection and/or
alarm) only trigger the recording after the specific
event has occurred.

Application example
Recording should run from 11:00 to 07:00. 2 time
zones must be set up for this:
1. 11:00 AM - 24:00PM
2. 00:00 AM - 7:00 AM

Note
To record using motion detection or the alarm, you
must first set this up in the Camera menu (see p.
39“Setting up of zones”) or Configuration (see p.
48 “Alarm”).

Advertising
This manual is related to the following products: