ABUS TVVR45021 Operating instructions - Manual (Page 80)

System operation
80
System operation
General information
The device can be controlled as follows:

Using the operating elements on the front of the
device

Using the remote control

Using the USB mouse
Operating elements on the device
Note
Pay attention to the overview on page 79.
No. Name
Function
1 Recorder operating keys:
MENU:

Calls up the main menu

Switches the key tones on and off (press and
hold down for 5 seconds)
REC:

Calls up the menu for manual recording
PLAY:

Opens the playback menu
ZOOM+:

Zooms in on the image section in PTZ mode
ZOOM-:

Zooms out of the image section in PTZ mode

Switches the video output in live mode: Moni-
tor – Spot Monitor or Video Out – Video Spot
Out
FOCUS+:

Sets the focus in PTZ mode
FOCUS-:

Sets the focus in PTZ mode
IRIS+:

Opens the iris
IRIS-:

Closes the iris in PTZ mode
PTZ:

Activates the PTZ control
MODE:

Switches the screen view
KEYLOCK:

Locks the control keys
2 USB ports:
For external USB 2.0 devices (e.g. mouse, ex-
ternal disk drive or DVR burner)
No. Name
Function
3 Camera selection keys (1, 2, 3...):
Displays the camera status:

White: Camera is connected

Blue: Connected camera is recording

Not lit: No camera connected
In the live view:

Selects the camera and displays the full-screen
view
4 Directional keypad:
During playback:

,  Sets the speed

,  Previous / next day
In the live view:

Selects the channel
In menus:

Navigation
OK key:

Press and hold for 5 seconds to switch the de-
vice on and off

Confirms the selection

Ticks / unticks the boxes
During playback:

PLAY/PAUSE
Increased/ decreased playback speed:

Normal playback speed
5 Jog Shuttle:
During playback:

Outer ring (shuttle ring) change playback
speed

Inner ring to play single frames in single mode
In menus:

Inner ring moves the cursor upwards / down-
wards

Outer ring moves the cursor left / right
In the live view:

Selects the channel
6 NVR status LED:
Displays the device status:

White (constantly lit): System status is OK

White (flashing): System status is OK, re-
cording settings are stored, surveillance mode
is active

Blue (constantly lit): At least one camera is cur-
rently recording

Red (constantly lit): System maintenance re-
quired
7 IR receiver:
For the remote control