Aeromotive 14134 - 04-06 SUBARU 2.0L WRX FUEL RAIL KIT - Manual (Page 4)

Thanks for purchasing another quality product designed, engineered and manufactured in
Kansas City, USA!
AEROMOTIVE, INC.
7805 Barton Street, Lenexa, KS 66214
913-647-7300 fax 913-647-7207
www.aeromotiveinc.com
24. Reinstall intake manifold assembly replacing gaskets and retightening bolts as outlined in
factory service manual.
25. Using an after-market fuel pressure regulator, Aeromotive p/n 13101 or 13109 or similar,
in conjunction with high pressure fuel lines and fittings, plumb the reminder of the fuel
system.
Ensure the any spilled gasoline and any gasoline soaked shop towels are cleaned up and removed from
the vicinity of the vehicle!
26. Reinstall any electrical wiring, vacuum lines, fuel lines and throttle body components that
where removed for the original fuel rail removal.
27. Refill engine coolant and check system for leaks
28. Reconnect the battery and turn the ignition to the ON position WITHOUT starting the
car. After several second turn the ignition key to the OFF position, wait one minute.
Repeat this process until you pressurize the fuel system.
29. With fuel pressure in the system, check for leaks from and around all the fuel system
components and all fuel lines and connections. If any fuel leaks are found, turn the
ignition key to the OFF position, remove any spilled gasoline and repair the leak before
proceeding.
30. Once the fuel system has been confirmed to be leak free, test drive the vehicle to insure
proper operation and re-check the fuel and coolant systems for leaks. If any leaks are
found, immediately shutoff the engine and repair the leak(s).