Aeromotive 14125 - 96-98 4.6L 1_2 SOHC GT FUEL RAIL SYSTEM - Manual

AEROMOTIVE
Part # 14125
96-’98 1/2 4.6L SOHC
Ford Fuel Rail Kit
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
Aeromotive system components are not legal for sale or use on emission controlled motor
vehicles.
Special tools needed:
Fuel supply line quick disconnect tool
Supplies needed:
Vehicle service manual
Fuel injector replacement O-rings
Light oil
Solvent parts cleaner
Clean shop towels
This kit contains the following parts:
1ea p/n 14103 Ford 4.6L SOHC Fuel Rails
1ea p/n 15102 Supply Adapter Tee Fitting
1ea p/n 15101 Return Adapter Fitting
1ea p/n 13101 A1000 Injected Bypass Regulator
4ea p/n 15607 –8/-8AN Cutoff Tapered Flare Fitting
2ea p/n 15610 –10/-8AN Cutoff Tapered Flare Fitting
1ea p/n 15606 –6/-6AN Cutoff Tapered Flare Fitting
1ea p/n 15650 –6 Straight Hose End
1ea p/n 15652 –6 90-Deg Hose End
1ea p/n 15653 –8 Straight Hose End
7ea p/n 15655 -8 90-Deg Hose End
3ft –6 Stainless Steel Braided Fuel Line
12ft –8 Stainless Steel Braided Fuel Line
1ea AN-06 O-Ring
4ea AN-08 O-Ring
2ea AN-10 O-Ring