Aeromotive 14101 - 86-95 5.0L GT & COBRA FUEL RAIL KIT - Manual

AEROMOTIVE
Part # 14101
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of
automotive systems and repair procedures. We recommend that this
installation be carried out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you
are working in a well ventilated area with an approved fire extinguisher
nearby. Extinguish all open flames, prohibit smoking and eliminate all
sources of ignition in the area of the vehicle before proceeding with the
installation.
When installing this product, wear eye goggles and other safety
apparel as needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until
the pressure has been relieved. Refer to the appropriate vehicle service
manual for the procedure and precautions for relieving the fuel system
pressure.
The enclosed Aeromotive fuel rails utilize o-ring sealed AN-08 style ports; these ports are
NOT PIPE THREAD and utilize NO THREAD SEALANT. To use the enclosed fuel rails in
your vehicle’s fuel system you must install the necessary adapter fittings and o-rings, high
pressure fuel lines and regulator to adapt your system to the configuration and ports of
these fuel rails. Please call for a catalog of the complete line of quality Aeromotive
products.
When installing o-rings it is important to place a small amount of light oil on both the o-
ring and the mating surface to ease installation and prevent damaging the o-ring.
Due to the large number of applications which these fuel rails fit, please refer to your
vehicles service manual for installation instructions. On the reverse side of this page you
will find a diagram of how these fuel rails assemble in your fuel system.
Aeromotive system components are not legal for sale or use on emission controlled motor
vehicles.