Aeromotive 17156 - COBRA JET ENGINE KIT - Manual

AEROMOTIVE
Part # 17156
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
Aeromotive system components are not legal for sale or use on emission controlled motor
vehicles.
Special tools needed:
Fuel supply line quick disconnect tool
Supplies needed:
Vehicle service manual
Fuel injector replacement O-rings
Light oil
Solvent parts cleaner
Clean shop towels
This kit contains the following parts:
1ea p/n 14141 Ford 5.4L DOHC Fuel Rails
1ea p/n 13128 EFI Regulator
1ea p/n 15115 Ford Adapter Fuel Pressure Senor
1ea p/n 15102 Supply Adapter Tee Fitting
6ea p/n 15607 AN-08 To Cutoff AN-08 Union
2ea p/n 15610 AN-08 To Cutoff AN-10 Union
1ea p/n 15631 Fuel Sample Valve
1ea p/n 15649 AN-06 Cutoff To AN-08 Union
1ea p/n 15674 Y-Block 8-2x8
3ea p/n 17704 Triple AN-08 Hose Separator
1ea Vacuum Tee
4ea p/n 15653 –8 Straight Hose End
2ea p/n 15654 -8 45-degree Hose End
5ea p/n 15655 –8 90-Degree Hose End
3ea p/n 15663 -8 180-Degree Hose End
20ft –8 Black Nylon Braided Fuel Line
3ft 5/32” Vacuum Line