Alera Lighting QST Silver - Manual

© 2013 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.aleralighting.com
Page 1/1 Rev. 02/13/13 Curves / Quest silver or White cross baffle
Quest silver or white cross baffle tiD
technical installation Data
Step 1
Loosen screws on the socket pan at each end and in the center of an
4' fixture. Slide clip under socket pan and tighten screws.
InstallatIon Data
Step 2
Slip one side of the louver onto the clips.
Step 3
Attach safety tether to upper housing and to side of the louver.
Step 4
Bring louver across the fixture and snap into clips on the other side.