Alera Lighting MR, MRA Grid - Manual (Page 2)

© 2009 Alera Lighting, a division of Hubbell Lighting, Inc. Because of continuing product improvement programs, Alera Lighting reserves the right to change specifications
without notice. 701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Tech Support 864.678.1580 / Website www.aleralighting.com
Page 2/2 Rev. 08/26/09 ReCeSSed / MR, MRA G TID
MR, MRA GRID
Technical Installation Data
InStAllAtIon InStRuctIonS
Adjust Grid opening to prescribed dimensions. 1.
Remove shielding from fixture and set aside. 2.
Remove supply wire access plate from top of fixture housing. 3.
Attach access plate to supply flex. 4.
Raise fixture to ceiling. Make electrical connections to fixture and reattach access plate. 5.
Pass fixture over Grid and lower until the fixture is flush with ceiling. 6.
Install lamps in fixture. 7.
Install shielding. 8.